Modern daybed – Daybeds replaces sofa in a modern interior. A modern daybed can double as a couch, fitting easily into living rooms, living rooms, bedrooms and offices. Turning a bench in a modern daybed is a simple project that will move cushions or a more complicated one that asks you to do some reupholstering? With just a few materials, turning a bank into a modern daybed is a simple do-it-yourself project that can be completed in a matter of hours.
Remove pillows that do not meet the bank. Set it aside. Remove any furniture near the center of the room, and went on to create a magazine to a workspace. Move the sofa to the workspace, place on top of the leaf. Comfortable around it. Remove upholstery staples along the back of the bench with pliers. Cut into the fabric on the back side of the layer, causing a large crack. Remove and discard the foam strike. Cut the frame for the back of the sofa using a hacksaw. Make sure not to damage the lower portion of the frame. You can let sit, if desired, keep a low back modern daybed on a part of the frame.
Turning a sofa in a modern daybed, Place foam batting over the exposed wood. Measure the unupholstered area of the bank, taking measurements in height, width and depth. Place the fabric to strike the foam, whereby 2 to 3 cm overlap on both sides. Pull the fabric taut over the batting, and stapling position along the back of the couch. Cut off the excess material, upholstery and follow the same procedure if you are doing the poor or the entire bank. Take the trim or cut out the fabric on the sofa seat cushions and back cover batting with new material if desired. Move the sofa in the desired position, remove the skin, removing dirt collected, and then vacuum the whole area.